Setting up a Brick Paver Walkway or Single Bricks

The use of Bricks or Pavers to develop a pathway or outdoor patio matches a home in a way that is unmatched. In addition, setting up a Brick or Paver walkway does not always require a pro.

The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be installed. In addition, string lines need to be strung on each side of the sidewalk.
As soon as the location has actually been dug down, 3/4" gravel stone need to be laid in and tamped down tightly. The height between the tamped down sand and the stringline must equal the density of the brick or paver.

Now that you have a stable base, put a 1" pipe or journal board the length of the sidewalk on either side of the sidewalk. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up an operate on both sides of the prepared area. These strips will serve as your walkway border and help to maintain the stability and shape of the pathway. You can get these plastic strip borders at the majority of house enhancement shops. The strips ought to be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the integrity of the walkway.

Inevitably bricks/pavers will need to be cut or divided when developing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the cracks. This will finish the interlocking of the bricks and assist to remove any weed growth.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The read more secret to installing a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or journal board the length of the pathway on either side of the pathway. These strips will act as your walkway border and assistance to maintain the stability and shape of the sidewalk. Inevitably bricks/pavers will need to be cut or big bricks divided when developing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *